*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Help please error code

The all new 2013 Transit Mk8 Forum. Transits 2013+

Help please error code

Postby madmackie » Fri Nov 30, 2018 6:09 pm

My eml came on last night did a scan with Delphi (Copy) got code p2463 any advice please tried a run on the motorway to force regen didn't happen light still on also noticed the temp gauge is messing about up and down and not blowing any hot air just like warm water levels etc ok see thx in advance
madmackie
Transit Addict
Transit Addict
 
Posts: 76
Joined: Tue Oct 12, 2010 10:31 am
Location: Wigan Lancashire

Re: Help please error code

Postby Frag » Sat Dec 01, 2018 6:25 pm

Change the thermostat,that should cure the temp issues,as for fault code....
It won't do regens if coolant doesn't go above 80 degrees.
If the soot load goes,or already is above 150% it likely won't regen itself as the drive to clean regen is disabled at 150.
You'll have to get a static regen done.
User avatar
Frag
Ford Technician
 
Posts: 4880
Joined: Sat Jul 05, 2008 3:05 pm

Re: Help please error code

Postby madmackie » Sat Dec 01, 2018 6:52 pm

Thankyou very much
madmackie
Transit Addict
Transit Addict
 
Posts: 76
Joined: Tue Oct 12, 2010 10:31 am
Location: Wigan Lancashire


Return to Mk8 Fourth Generation Transits



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.