boltondigger wrote:That system is a bloody nuisance!! 2 years ive been looking at the light on the dash
What was wrong with a spring in the pad that squealed when the pads went low
loot34 wrote:1 of those don't look right to me check the front connectors so you know what is what and if need be follow the loom from the axle to the chassis and open it up a bit to see the wires
loot34 wrote:boltondigger wrote:That system is a bloody nuisance!! 2 years ive been looking at the light on the dash
What was wrong with a spring in the pad that squealed when the pads went low
If you have a mk7 just unplug the speedo and bridge pins 15 and 18 then plug the speedo back in
loot34 wrote:boltondigger wrote:That system is a bloody nuisance!! 2 years ive been looking at the light on the dash
What was wrong with a spring in the pad that squealed when the pads went low
If you have a mk7 just unplug the speedo and bridge pins 15 and 18 then plug the speedo back in
loot wrote:If you have a mk7 just unplug the speedo and bridge pins 15 and 18 then plug the speedo back in
Return to Mk6 & Mk7 - Third Generation Transits
Users browsing this forum: No registered users
This site contains affiliate links for which we may be compensated.