Hello,
I want to remove the plastic cap that covers the stop soloniod on th bosch pump. How can I do that?
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
How to remove the plastic cover
3 posts
• Page 1 of 1
Re: How to remove the plastic cover
by Altransit » Thu Apr 11, 2024 2:16 pm
There are two small TORX screws at the back with the recessed heads facing the bulkhead. Very hard to see, and awkward to unscrew but it is possible with a bit of patience 
1994 Mk4 SWB 115 Minibus 70ps Di (R.I.P.)
1997 Mk5 SWB 115 Minibus 70ps Di (Gone, but not forgotten!)
2004 Mk6 SWB T280 Medium Roof 85PS 2.0 TDDi - Vantunered (Also gone)
2008 Mk7 SWB T280 Medium Roof 85PS 2.2 TDCi - Also Vantunered
1997 Mk5 SWB 115 Minibus 70ps Di (Gone, but not forgotten!)
2004 Mk6 SWB T280 Medium Roof 85PS 2.0 TDDi - Vantunered (Also gone)
2008 Mk7 SWB T280 Medium Roof 85PS 2.2 TDCi - Also Vantunered
-
Altransit - Site Moderator
- Posts: 40300
- Joined: Tue Oct 17, 2006 12:23 am
- Location: Bicester, Oxfordshire, UK
Re: How to remove the plastic cover
by marthagates » Fri Apr 12, 2024 9:52 am
There are two small TORX screws at the back with the recessed heads facing the bulkhead. Very hard to see, and awkward to unscrew but it is possible with a bit of patience
I found it. Thanks for your answer
- marthagates
3 posts
• Page 1 of 1
Return to Mk 3, 4 & 5 - Second Generation Transits
Who is online
Users browsing this forum: Altransit