IMG_3067.JPG
Moving forwards again slowly, I visited the depths of the fens a few weeks ago and bought a Complete Bullnose bonnet and front panels from Lee Batchelor and whilst talking to his dad have seen what a proper Bullnose looks like, so I've drilled out the spot welds on my V4 front crossmember and removed it in one piece in case its ever needed again.
They're not held in by much 10 spot welds at best, and my front valance had very few spot welds in it courtesy of the Met police.....
I've made a very heavy bolt in front crossmember and took care that the bolt holes go through in the same places as there are cut-outs in the front legs anyway so nobody is going to say I've reduced the structural integrity.
IMG_3066.JPG
You do not have the required permissions to view the files attached to this post.