Moderator: Luke
savi18 wrote:Hi Team, Engine starts first time when cold however when hot and turned off and after around 2 minutes spins over fine but wont start, here is the best bit if you pore cold water over injection pump for around 20 seconds the engine starts first click, have tried around 10 times and always starts no cold water and wont start, any ideas please van is a 2003 2.4 TDDi 90ps RWD. PS: have changed Crank Sensor.
knobby1 wrote:savi18 wrote:Hi Team, Engine starts first time when cold however when hot and turned off and after around 2 minutes spins over fine but wont start, here is the best bit if you pore cold water over injection pump for around 20 seconds the engine starts first click, have tried around 10 times and always starts no cold water and wont start, any ideas please van is a 2003 2.4 TDDi 90ps RWD. PS: have changed Crank Sensor.
What fault codes are you getting..??
Lord Knobrot
Altransit wrote:knobby1 wrote:savi18 wrote:Hi Team, Engine starts first time when cold however when hot and turned off and after around 2 minutes spins over fine but wont start, here is the best bit if you pore cold water over injection pump for around 20 seconds the engine starts first click, have tried around 10 times and always starts no cold water and wont start, any ideas please van is a 2003 2.4 TDDi 90ps RWD. PS: have changed Crank Sensor.
What fault codes are you getting..??
Lord Knobrot
viewtopic.php?f=5&t=224560&p=1805118#p1805044
savi18 wrote:Hi Team, Engine starts first time when cold however when hot and turned off and after around 2 minutes spins over fine but wont start, here is the best bit if you pore cold water over injection pump for around 20 seconds the engine starts first click, have tried around 10 times and always starts no cold water and wont start, any ideas please van is a 2003 2.4 TDDi 90ps RWD. PS: have changed Crank Sensor.
savi18 wrote:savi18 wrote:Hi Team, Engine starts first time when cold however when hot and turned off and after around 2 minutes spins over fine but wont start, here is the best bit if you pore cold water over injection pump for around 20 seconds the engine starts first click, have tried around 10 times and always starts no cold water and wont start, any ideas please van is a 2003 2.4 TDDi 90ps RWD. PS: have changed Crank Sensor.
Getting DTC CODE P0149
Return to Technical Problems & Questions
Users browsing this forum: Google [Bot]
This site contains affiliate links for which we may be compensated.