I am looking to splice into the can bus, but I am having trouble finding the correct wires for this. Does anyone have experience or information on the best place to splice into the high speed can bus?
The FORD Transit 2021.25 Body and Equipment Mounting Manual mentions "The CAN Interface loop wire is located near the 43 way Interface Connector, behind the glove box and outboard to the wheel arch. The halfway loop point can be spliced into with third party twisted pairs of at least 3 twists per 50mm and a minimum of 0.3m to a maximum of 2m stub length to module. CAN Low is the Violet/Orange wire. CAN High is the Grey/Orange wire", but I can't seem to find these wires behind the glove box.
Thanks